
A fermenter you can weigh tells you two things. When you fill it, the weight gives you the volume. And once the yeast gets going it gives you the gravity: the CO₂ that leaves through the spunding valve is weight the beer loses, so a scale under the tank can follow the fermentation in real…

Most of the time a fermenter needs cooling, but now and then it needs heat – a yeast that likes it warm, a diacetyl rest at the end of fermentation, or a room that’s colder than the beer should be. Our glycol chiller can only take heat away, so the F80 needs a heater as…

Brewtools’ density meter and agitator are excellent pieces of equipment, but they’re designed to talk to Brewtools’ own system over a private CAN bus. We wanted to use them directly in Home Assistant — so we built a small open-source bridge that does exactly that. The controller is built around an ESP32-C3 microcontroller and a…

We have thought about building an electronic spunding valve for a while. We have measured pressure accurately and logged it to a db for a long time now but used a manual spunding valve. When planing for a brew we realized that the spunding would fall during a vacation out of town and that triggered…
![[OLD] Volume sensor for the fermenter (from weight)](https://gammabrewery.com/wp-content/uploads/2023/05/IMG_1504-400x266.jpeg)
This post describes our first fermenter scale – see Weighing the F80 for the one we use today. The differential pressure based volume sensor is kind of tricky to use and have a lot of “moving parts” so we designed a volume sensor based on the fermenter weight instead. The scale is a standard bathroom…

When we invested in a Brewtools F80 fermenter we needed a glycol chiller for it. As usual we decided to make one instead of buying one. The nice thing is that we have total control over the system and we could crank the BTU/h up to 8000 without breaking the bank. Stripping the AC down…

Due to the physical properties of liquids, especially water, there is a great gradient in temperature of the liquid in a partially cooled vessel that is not agitated. This can be seen if you drill a hole in the ice of a lake, you will (probably) find liquid water under the ice. Density of (liquid)…